Making A Blood Pressure Measurement 7; Attaching The Wrist Cuff - IBP MEDIPRO 100fn Manual De Instrucciones

making a blood pressure measurement 7

7.1 attaching the wrist cuff

a) Plug in the cuff connecting tube into the left
side of the unit. The monitor is used as a
desktop unit.
Rossmax Flex Cuff is an elastic U-ring which
b)
offers quick and comfortable match with
your upper arm. (a).
Put your left arm through the cuff loop.
c)
Position the red marked artery range at the
middle of the arm (b), in line with your middle
finger. Tighten the cuff by pulling the end of
the cuff (c).
d) Turn your left palm upward and place the
edge of the arm cuff at approximately 2 to 3
cm above the inner side of the elbow joint (d).
e) If the "Index" arrow falls within the "OK"
range, indicated at the edge of the cuff, this
cuff is suitable for your use. If the "Index"
arrow falls out of the "OK" range, you may
need a special cuff for measurement.
a
Flex Cuff
Just fit on the upper
arm and placing the
cuff is so easy!
d 2-3 cm
b
c
red marked
artery range
11