The Memory Function - IBP MEDIPRO 100fn Manual De Instrucciones

8 the memory function

a) Up to 90 measurements can be saved in the memory auto-
matically. The values (blood pressure and pulse rate) can be
saved in the memory of the unit.
b) To read memory values, press the MEMORY key. The memory
values will be shown on the LCD, together with the time and
date. The last measurement will be shown first. Every new press
of the MEMORY key calls one prior value pair.
If 90 measurements are already stored in the memory and a
new measured value is stored, the oldest measured value will be
deleted.
note:
The data in the memory will not be lost even when the Blood Pressure Monitor is switched
off. The data in the memory is erased when the batteries are replaced.
16