24 Bit Digital Effect Section; Tape In And Aux In Section - Samson XM410 Manual Del Usuario

FRONT PANEL CONTROLS

24 BIT DIGITAL EFFECT SECTION

The XM410 features a built-in, 24 Bit Digital Effects processor with 100 high quality,
studio grade effects like Delay, Chorus and Reverb. The following section describes
the features of the powerful on-board digital effects section:
6
SELECT - Digital Effects Select Switch
The SELECT switch allows you to pick one of the 100 built-in digital effects.
Simply rotate the SELECT to choose the effect.
Effect PROGRAM List
This section identifies the ten banks of built-in DSP effects presets. The first
bank of 10 presets are designed for live performance, and the following
banks are set up in groups by the types of effects.
7
EFX LEVEL - Master Effect Send
The EFX LEVEL control is used to send the effect mix bus to an external effect
device connected to the AUX 2 SEND jack. The EFX LEVEL is also used to
control the overall level sent to the internal DSP.
8
EFX ON - switch
The EFX ON control is used to turn the internal Digital Effect on and off. The
effects are bypassed when the switch is in the out position and the display
shows two dashes

TAPE IN AND AUX IN SECTION

This allows you to adjust the level of the signal from an external device
such as an MP3 , cassette, or CD player or from an external effect device.
9
VOLUME - Tape In Level Control
This adjusts the amount of signal that is sent from the TAPE IN jacks to the
MAIN bus.
Controls and Functions
5
6
8
7