Control Panel - Sinmag Europe SPIRALO XL 120A Manual De Instrucciones

8. CONTROL PANEL

ENG
Timer
for reverse direction.
Button for speed selection.
Button for direction
selection.
INCH Button. Only the
bowl will turn while you
press this button.
9. OPERATION OF THE SPIRAL MIXER
9.1 TIMERS
The timers are located at the upper side of the panel. Timer
for first speed, timer
The timers are set by means of the
will increase by 10 seconds. The maximum time that can be set is 20 minutes. After 20
minutes, the timer will start from 0 minutes again. Press the
by 10 seconds.
When the
When the spiral mixer is switched
starts to work, the time indicated on the timer will be reduced 10 seconds at a time until it
reaches 0..
When the safety cover is raised during AUTOMATIC operation
stop at the current position. When the spiral mixer restarts after such a stop, the timer will
continue from the current position to finish the remaining time.
22
Auto/manuel button
for second speed. The 3 timers display the time in minutes.
During MANUAL operation, the timers will not work..
key is pressed, the timers will return to the set time.
Timer
for first speed.
Start/stop buttons.
and keys. If you press the
the timers will indicate the set time. When the timer
Timer
for second speed.
LED indicators.
is for reverse direction, timer
once, the set time
key for reducing the set time
the timer will