Automatic Operation - Sinmag Europe SPIRALO XL 120A Manual De Instrucciones

9.2 INDICATION LEDS
These LEDS show the operation mode in which the spiral mixer is functioning:
AUTO/MANUAL" operation
When the AUTO LED lights up, the spiral mixer is functioning in AUTOMATIC
mode..
When the MANU LED lights up, the spiral mixer is functioning in MANUAL
mode.
Bowl direction
When the
(clockwise).
When the
(counterclockwise)
Speed
When the LED lights up, the spiral mixer is operating in first speed.
When the
Fonction
The ON-LED lights up when the machine is functioning.
The "STOP"-LED lights up only when the safety cover is raised during
operation of the machine.
O.L. (Over-Load): This LED lights up when the overload relay is on. After the
fault (voltage drop, mixer overload or one of the cable connections has come
loose) has been removed, this LED will turn off.

9.3 AUTOMATIC OPERATION

A. Press the AUTO/MANU -button until the AUTO-LED lights up.
B. Press the and
C. Press the and
D. Press the and
E. Press the button to start the machine.
After completing the above procedure, the machine will start operating. It will work in
reverse direction until timer
speed until timer reaches 0. Finally the machine will start operating in second speed until
timer reaches 0. The machine will now stop automatically.
LED lights up, the bowl will rotate in FORWARD direction
LED lights up, the bowl will rotate in REVERSE direction.
LED lights up, the spiral mixer is operating in second speed.
buttons below timer
buttons below timer to set the desired time for first speed.
buttons below timer
reaches 0. Then the machine will start operating in first
to set desired time for reverse direction..
to set the desired time for second speed.
ENG
23