Sinmag Europe SE10L Manual De Instrucciones página 8

ENG
2. INSTALLATION
BEFORE INSTALL YOUR MIXER, CHECK TO BE SURE
THAT YOUR ELECTRICAL SERVICE
SPECIFICATIONS MATCH THOSE OF YOUR MIXER
AS PRINTED ON THE MIXER'S NAMEPLATE.
2-1 LOCATION
Place the mixer in its operating location. Bench should be placed on a
sturdy level surface. There should be adequate space around the mixer
for the user to operate the control and install and remove bowls.
2-2 ELECTRICAL CONNECTIONS (Cord Connected Mixers)
WARNING:
THIS SUPPLY CORD ON THIS MACHINE IS PROVIDED WITH A
THREE-PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT
THE OUTLET TO WHICH THIS PLUG IS CONNECTED BE
PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE
PROPER GROUNDING TYPE, AN ELECTRICIAN SHOULD BE
CONTACTED.
SINMAG EUROPE BVBA
8