Michelin 12V Instrucciones De Uso página 9

USER INSTRUCTIONS
The recommendation is that you initially check your tyre pressures with the
digital tyre pressure gauge removed from the tyre inflator.
Detach the digital tyre pressure gauge from the compressor (fig.1), and follow.
a/ Press button (B) once to switch on.
b/ Press nozzle on tyre valve, ensuring that there is a good seal.
c/ Hold until pressure reading is displayed on LCD screen.
d/ Promptly remove gauge from tyre valve and note pressure reading.
e/ To take another pressure reading, simply repeat steps b - d.
f/ Press and hold for 3 seconds to switch off.
If tyre pressure is low :
1. Replace digital tyre pressure gauge into inflator by simply pushing back into
recess until the locking tabs engage.
2. Completely unwind the electric cable.
3. Verify that the switch "0/1" is in the stop position '0'.
4. Connect the 12V plug to the power socket.
(B)
(A)
fig.1
GB
9