Assembly And Use Of The Pitcher - Ninja BL820 Guia Del Usuario

Assembly and Use of the Pitcher

WARNING: Handle the Top Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk
of the user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Assembly
Fig. 1 Fig. 2
1 Review warning and caution statements
above before proceeding to number 2.
2 Place the motor base on a clean, dry, level
surface such as a counter or table top.
3 Align and lower the pitcher onto the motor
base. (Fig. 1) Handle should be aligned
slightly to the right of the "LOCK" symbol on
the motor base.
4 Rotate the pitcher clockwise until it locks in
place. (Fig. 2) You will hear a click when the
lock is engaged.
NOTE: The pitcher can be placed on the motor
base two ways; the handle can be on the front
right corner or the front left corner.
(Fig. 3a, Fig. 3b)
5 Holding the Top Stacked Blade Assembly by
the top of the shaft, place it onto the bottom
blades inside the pitcher. Ensure that the Top
Stacked Blade Assembly is seated properly
by standing the blade assembly upright in
the pitcher. Do not operate the unit if the Top
Stacked Blade Assembly is not upright at any
time. (Fig. 4)
NOTE: The Top Stacked Blade Assembly will
fit loosely on the bottom blades but will be
secured once the lid is in place.
Fig. 3a
OR
Fig. 3b
TIP: When pureeing, use only the bottom
blades for best results.
NOTE: The bottom blades are not removable.
6 Add the ingredients to the pitcher, making
sure that they do not exceed the 72 ounce
mark on the pitcher.
NOTE: If you need to add additional
ingredients while the appliance is processing,
turn the appliance off, open the pour spout
cap and pour the ingredients in through the
opening.
NOTE: When blending any kind of liquids,
such as mixtures of any drinks or smoothies,
do not exceed the "MAX" liquid mark (64
ounces) on the pitcher.
7 Plug the power cord into the electrical outlet
and press the power button ( ).
8 Holding the lid by the handle in the upright
position, place it on top of the pitcher aligning
the arrow ( ) located on the lid with the
arrow ( ) located on the pitcher's handle.
(Fig. 5) Press the handle down until you hear
a click.
Fig. 4 Fig. 5
www.ninjakitchen.com
13