Ninja BL820 Guia Del Usuario página 18

Using the Cutting Discs
WARNING: The Cutting Discs are sharp. Always use the finger holes when placing or removing the
cutting discs. Failure to do so will result in a risk of laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged
or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
IMPORTANT: Make sure that the motor base is plugged in for use.
1.877.646.5288
18
1 Review warning statements at the top before
2 Place the motor base on a clean, dry, level surface
3 Secure the bowl onto the motor base.
4 Place the disc gear shaft inside the bowl.
5 Use the finger holes to grasp the selected disc and
6 Place the feed chute lid on the bowl and turn
7 Plug the power cord into the electrical outlet and
8 Turn the variable speed dial to 10 (Dough & Discs).
9 Press the Start/Stop/Pulse toggle up to have the
10 Add the food that you want to slice, shred or grate
11 When finished, press the Start/Stop toggle up to
Fig. 24
NOTE: The feed chute lid features a two part
pusher to guide food through the chute. Use the
full pusher for larger items such as cucumbers.
Twist and pull to remove the smaller pusher and
use the narrow chute for smaller items such as
carrots.
IMPORTANT: Use only the "DOUGH/DISC" setting
when mixing dough or using either disc.
IMPORTANT: Use ONLY the Feed Chute Lid when
using the discs.
proceeding to number 2.
such as a counter or table top.
(Fig. 24)
place it over the gear shaft.
clockwise to lock in place. (Fig. 24)
press up on the power toggle ( ) to turn the power
"On".
discs start spinning.
through the feed chute on the lid.
(Fig. 24)
stop the discs and then press the power toggle
down to turn the appliance off. Remove the lid.
Using the finger holes, carefully lift the disc out of
the bowl.