Lumme LU-1445 Manual De Instrucciones página 26

ПОДОГРЕВ/ОТМЕНА button, all of applied changes stay kept in memory of device anyway. Settings of any stage of the SMART program can be also adjusted while program is
running but these changes will not be saved in memory.
ATTENTION! Keep in mind quantity of earlier programmed phases while entering new settings! If you earlier entered new settings for three stages and then you need to
use only two stages with new settings; don't forget to set nil values for the third stage! To set nil values just enter edit mode of the SMART program as described above and set
zero values of cooking time/temperature on all stages which you don't need anymore.
PROGRAM OF USER SETTINGS «MULTICOOK»
MULTICOOK (МУЛЬТИПОВАР) program is the second in programs list. Choose it by pressing MENU
program's default cooking settings will be displayed. Press the TIME ВРЕМЯ
or buttons (interval -1 min). Press the TIME ВРЕМЯ
TEMPERATURE ТЕМПЕРАТУРА
hold it pressed when you need to change value to much bigger or smaller. Press START СТАРТ/АВТОПОДОГРЕВ
settings. Cooker will start working. You may adjust values of cooking time and temperature while program is running.
NOTICE: Last values of cooking settings stay kept in memory of device.
CHEF
Cooking settings of any program (except EXPRESS) might be adjusted while program is running. Just press the TIME ВРЕМЯ
minutes' indicator will start flashing; change values by
or buttons (interval -1 hour). Then press the TEMPERATURE ТЕМПЕРАТУРА
degree). To avoid multiple touching buttons
settings.
ATTENTION! Cooking time can be adjusted from 1 minute and up to 60 minutes; 1 hour and up to 24 hours! Incorrect settings of cooking time may turn products to bad
to damage of device! Values of cooking temperature of programs BREAD
button again; hours' indicator will start flashing; change values by
button and set value of cooking temperature which you need by buttons
or buttons (interval -1 min). Press the TIME ВРЕМЯ
and hold it pressed when you need to change value to much bigger or smaller. Program will go on cooking with new adjusted cooking
МЕНЮ/ОК and
button to set values of cooking time which you need; minutes' indicator will start flashing; change values by
or
button and set value of cooking temperature which you need by buttons
and PILAW may not be adjusted but values of total cooking time are adjustable!
26
buttons. Indicator
or buttons (interval -1 hour). Then press the
. (interval – 1 degree). To avoid multiple touching buttons
button to start MULTICOOK program with your own cooking
button to set value of cooking time which you need;
button again; hours' indicator will start flashing; change values by
LU-1445/1447
will start flashing and
and
or . (Interval – 1
and lead