eStore
NOTICE!
A
Check that the voltage specification on the type plate is the
same as that of the power supply.
Ensure that other objects cannot cause a short circuit on the
contacts of the device.
Ensure that the positive [+] and negative [-] terminals never
come into contact.
If cables have to be led through sharp-edged walls, use a cable
duct or cable bushes!
Do not lay any loose or sharp bent cables against electric-
conducting materials (metal).
2.2
Operating the device safely
DANGER! Danger of electrocution!
D
Do not touch exposed cables with your bare hands. This applies
especially to connected devices using the AC mains.
WARNING!
!
Only use the device in closed, well-ventilated rooms.
CAUTION!
!
Do not operate the device
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions.
Do not pull on cables.
3
Scope of delivery
eStore battery
Installation and operating manual
EN
Scope of delivery
11