Electrical Connection; Extension Lead; Electrical Components - MIRKA 912 Instrucciones De Manejo

GB
Mirka 912/915
D

Electrical connection

F
1. It is recommended that the vacuum
cleaner should be connected via a residual
NL
current circuit breaker.
2. Arrange the electrical parts (sockets, plugs
I
and couplings) and lay down the exten-
sion lead so that the protection class is
N
maintained.
3. Connectors and couplings of power sup-
S
ply cords and extension leads must be
watertight.
DK

Extension lead

FIN
1. As an extension lead, only use the version
specified by the manufacturer or one of a
E
higher quality. When using an extension
lead, check the minimum cross-sections of
P
the cable:
Cable length
GR
up to 20 m
TR
20 to 50 m
SLO
Maintenance, cleaning and repair
During maintenance and cleaning, handle the
CZ
vacuum cleaner in such a manner that there
is no danger for maintenance staff or other
PL
persons.
RUS
In the maintenance area
• use filtered compulsory ventilation
EST
• wear protective clothing
• clean the maintenance are so that no harm-
LV
ful substances get into the surroundings
LT
CN
JP
2
Cross section
< 16 A < 25 A
1,5 mm / AWG 14 2,5 mm / AWG 12
2 2
2,5 mm / AWG 12 4,0 mm / AWG 10
2 2
Risks

Electrical components

DANGER
Electric shock due to faulty mains
connecting lead.
Touching a faulty mains connect-
ing lead can result in serious or
even fatal injuries.
1. Do not damage the mains
power lead (e.g. by driving over
it, pulling or crushing it).
2. Regularly check whether the
power cord is damaged or
shows signs of ageing.
3. Have the faulty mains con-
necting lead replaced by your
Mirka Service representative or
a qualified electrician prior to
using the appliance again.
DANGER
The upper section of the vacuum
cleaner contains live components.
Contact with live components leads
to serious or even fatal injuries.
1. Never spray water on to the
upper section of the vacuum
cleaner.
CAUTION
Appliance socket.
The appliance socket is only
designed for the purposes defined
in the operating instructions. The
connection of different appliances
can result in damage.
1. Prior to plugging in an appliance,
always switch off the vacuum
cleaner and the appliance that is
to be connected.
2. Read the operating instructions
to the appliance to be connected
and observe the safety notes
contained in these.