Setting The Time; Setting The Date; Using The Chronograph - Festina IFM6S30 Manual De Instrucciones

SETTING THE TIME

Pull the crown out to the 2nd Click Position.
1.
Turn the crown clockwise to set hour and minute hands.
2.
After the time has been set, push the crown back to the Normal position.
3.

SETTING THE DATE

Pull the crown out to the 1st Click Position.
1.
Turn the crown clockwise to set the date.
2.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date
may not change on the following day.
After the date has been set, push the crown back to the Normal position.
3.
All manuals and user guides at all-guides.com
I F M 6 S 3 0
16
I F M 6 S 3 0

USING THE CHRONOGRAPH

This chronograph is able to measure and display time in 1/20 second united
up to maximum of 59min, 59sec. The chronograph 1/20 second hand keeps
continuously for 30 seconds after starting, and then stops at Zero position.
[Measuring time with the stopwatch]
Press button " A " to start the chronograph.
1.
The chronograph can be started and stopped each time button "A" is
2.
pressed.
Press button "B" to reset the chronograph and chronograph minute and
3.
second hands return to their Zero positions.
Reset
measurement
Time
Stop
17