Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1.2
Rubber Ball Material Characteristics
•
The above-mentioned item consists of soft PVC (medical-grad Soft-PVC, PVC-P in short),
•
the item is latex-free,
•
is physiologically harmless as recommended by XLVII-BGA,
•
is white, lead-free and cadmium-free,
•
does not contain the plasticizer DEHP,
•
and is CE-marked.
1.3
Adjustment of the Pressure Gauge
Before shipment, the pressure gauge is factory-tested with a very exact and pre-defined test
pressure in a so-called 3-point calibration. This means unpressurized, with the mean value and
with the highest value (end value). This way, the pressure gauges are adjusted to these
values.
"Normal" environmental conditions and intentional use have no influence on the pressure
gauges. Mechanical influences (falling, vibrations, etc.) strong temperature fluctuations, humid
or also dusty environmental conditions can affect the accuracy of the pressure gauge.
Wrong or inaccurate readings can also be caused by defective tubes or balls.
In order to ensure steady measurement and readings, the pressure gauges must regularly
(every 1 – 2 years) be sent in to Gebrüder Martin for checking purposes, cleaning (inside of
the pressure gauge) and re-adjustment (as described above).
1.4
Information regarding Cleaning and Reprocessing
1.4.1
Pressure gauge and tube with plug cone
The pressure gauge (09-400-01-04) and the tube can be cleaned on the outside using a damp
but not wet cloth and a common cleaning and disinfection agent.
1.4.2
Rubber balls
•
Sterilization by boiling: Dismount balls, immerse in boiling water and boil approx.
10 minutes
•
Gas sterilization: Sterilization by means of ethylene oxide is possible
•
Radiation sterilization: Gamma-ray sterilization is possible (depending on ball color there
may be slight color changes)
•
Steam sterilization: not possible
10
Directions for Use
Vigorimeter
V. 1.1
Publicidad
Capítulos
Tabla de contenido
