Mounting - hafele DT 100 Instrucciones De Montaje Y De Servicio

Mounting

Requirements:
Depending on the design of the mounting plate, it also possible to use mortise
locks on the DT 100 that deviate from the DIN norm (e.g. for Austria).
The length of the following DT 100 components depends on the thickness
of the door and must therefore be selected appropriately:
Tools required and auxiliary mounting materials:
- Ø = 8 mm
- Ø = 16 mm (drilled hole for the connection cable)
Mounting and Operating Instructions
DT 100 - Status: 087.2011 - 732.29.137 39