Technical Specifications; Customer Support - MELICONI HP600 PRO Instrucciones De Uso

Tabla de contenido

Idiomas disponibles

The battery of the headphones can be recharged by connecting a standard charger with a micro-USB cable (not

provided) to the micro USB socket "F" on the headphones. While the headphones are charging, the green LED light "B"

will be on, and will switch off when they are fully charged. It is possible to use the headphones with a direct connection

to the audio source (without the base), by plugging the 3.5 mm jack cable into AUX socket "E". The base unit is also

equipped with a coaxial digital audio input "P". In order to connect to this, you will need a specific cable, not provided.

Transmission bandwidth

Carrier frequencies

RF output Power

Transmitter power supply

Frequency response

Distortion

Signal/noise ratio

Channel separation

Maximum transmission distance

Headphone charging current

Headphone charging time

Headphone operating current

Integrated Lithium Polymer battery (headphones)

Operating time of the headphones

Operating temperature

If the headphones do not produce any sound or if the audio signal is disturbed or is presumed to come from other sources,

carry out the following steps:

1. Check that all the connections are correct and that the device is operating as described in this manual.

2. If the audio feed has been connected using a digital optical cable (Toslink) or digital coaxial cable, check that the

audio output of your appliance (e.g. TV or decoder) is set to "PCM" or "LPCM". To do this correctly, consult the

instruction manual of your TV or decoder.

3. If the audio feed has been connected using an aux audio cable (3.5 mm jack), try turning up the volume of the audio

source.

4. Turn off the headphones with button "C", move closer to the base unit then turn the headphones on again, checking

if the red light "B" comes on.

5. If the problem persists, try using selector "L" on the base to change the channel (1-2-3), and press button "C" for a

moment.

If you have any queries regarding HP600 Professional:

• read this instruction manual carefully, as it will help you solve most problems.

• consult our website: www.meliconi.com

For any questions/problems write to us at info@meliconi.com

The manufacturer, Meliconi S.p.A., declares that the type of radio equipment marketed as HP600 Pro Headphones is

compliant with Directive 2014/53/EU (RED). The full text of the EU Declaration of Conformity is available at the following

web address: http://www.meliconi.com/doc/hp600pro

Notes