asalvo TRIO ROMA Manual De Instrucciones página 31

SEAT UNIT (I)
FIG. 10 FIG. 11 FIG. 12
1. Assembly of the seat
Release the belts under the seat unit by separate the Velcro straps
(fig.10). Insert the seat fabric carefully onto the frame as fig.11 shows.
Place both pins into the corresponding openings from inside the handle.
Press downwards until pins are fixed (fig.12).
Repeat the same actions to fix the pins of opposite side. Make sure pins
are well fixed both sides. Insert the belts under the seat through side
tubes of the frame (tubes for basket assembly). Join the belts (fig.13)
31
and fasten Velcro straps to fix the seat to the frame (fig.14).
ATTENTION! Make sure the seat is well fixed and is stable before each
use.
FIG. 13 FIG. 14