asalvo TRIO ROMA Manual De Instrucciones página 32

FIG. 15
2. Disassembly of the seat
Release the belts under the seat unit by separating the Velcro straps
(fig.15) and separate the belts (fig.16). Pull upwards the pins from
both sides of handle (fig. 17-1) and release the seat fabric from the
frame (fig. 17-2). Remove carefully the seat fabric, as fig. 18 shows.
32
Place the front bumper to the armrests of stroller. Press firmly both
ends of bumper until you hear a click and they are fixed (fig.19). Make
sure bumper is well fixed. To remove the front bumper, press the but-
tons at both ends under the bumper (fig.20-1) and pull it upwards
(fig.20-2).
ATTENTION! Always use the safety belts in combination with the front
bumper.
SEAT UNIT (II)
FIG. 16
FRONT BUMPER
FIG. 19
FIG. 17 FIG. 18
FIG. 20