Cleaning The Blades; Technical Characteristics - HAIRCUT SHARK TH11 Manual De Usuario

EN
4 Servicing
4.1 Routine servicing
 After using the clippers each time, clean the blades with the brush supplied
(Fig. 6a).
 If necessary, clean the body of the clippers with a cloth slightly dampened with
water or mild liquid soap. Never use abrasive products or solvents.
 Clean the blades with an antibacterial spray. We recommend STERIL CLEANER
920- or 921- disinfectant and lubricant products.
 Lubricate the blades at least once a day, by putting a drop of oil on the points
shown (Fig 3).
 Switch the clippers on for a few seconds after lubricating them.

4.2 Cleaning the blades

In the case of regular use, clean the blades at least once a day.
 Remove the blades as described in § 3.3.
 Clean the inside of the blades with the brush supplied (Fig. 6b).*
 Install the blades as described in § 3.3.
5

Technical characteristics

Element
Function
Electrical power supply
Electrical power
Classification
Standard blades
Cutting height
Speed of rotation
Lead length
Weight (without electrical lead)
Description
All-purpose cord clippers for human hair and
hairs, made by HAIRCUT.
220–240 V 50/60 Hz
5 W
Class II equipment
Width 40 mm
0.1 mm
3000 rpm
3 m
205 g
18