List Of Pictograms Used; Introduction; Intended Use; Parts Description - Parkside PAR 10.8 B1 Instrucciones De Utilización Y De Seguridad

Introduction

List of pictograms used:

Cordless ratchet PAR 10.8 B1
Introduction
Congratulations! You have pur-
chased a high-quality product
from our company. Familiarise
yourself with the product before using it for the first
time. In addition, please carefully refer to the instruc-
tions for use and the safety instructions below.
KEEP OUT OF THE REACH OF CHILDREN!

Intended use

This tool is suitable for tightening and loosening hex-
agon head screws and nuts. The product must only
be used as described and for the specified fields of
application. Keep these instructions in a safe place.
When passing this product on to others, please also
include all the documents. Any use other than the
intended is prohibited and potentially dangerous.
Damages resulting from noncompliance or misuse
16 GB/IE
Caution! Read instructions
for use!
Safety class II
Severe to fatal injuries may
occur
Attention, potential dangers!
Protect the rechargeable bat-
tery from heat, e.g. including
continuous sun exposure, fire,
water and moisture. Risk of
explosion.
The charger is only suitable
for indoor use.
Do not dispose of electrical
equipment in household waste!
Never dispose of rechargea-
ble batteries in your household
refuse!
Li-Ion
Dispose of packaging and tool
in an environmentally-friendly
way!
are not covered by the warranty and are not in-
cluded in the manufacturer's liability. This tool was
designed for household use and must not be used
for commercial or industrial purposes.

Parts Description

Forward / reverse switch
1
Battery status indicator
2
Unlock keys
3
Rechargeable battery pack
4
ON / OFF switch
5
Drive shaft
6
Rapid charger
7
Charge indicator LED
8
Status LED
9
Adapter sleeve to
10
Adapter sleeve to hexagon bit retainer
11
Sockets (10, 12, 13, 14, 15, 17 mm)
12