Parts Identification; Remote Control - JVC GM-P420E Manual De Instrucciones

Parts Identification

Remote Control

1 Remote control cable jack (page 11)
Connect the remote control cable (not supplied) when
using this remote control as a wired remote control.
2 DISPLAY button (page 14)
Use this button to display the input terminal, color system
(for VIDEO A or VIDEO B input), scan system (for
COMPONENT input) and horizontal/vertical frequency
(for RGB A and RGB B input).
Pressing the button again will make the display disappear.
3 VIDEO A, VIDEO B, COMPO./RGB B and RGB A buttons
(page 14)
Use these buttons to switch between inputs.
To select the COMPONENT or RGB B input, you have to
set "RGB/COMPO." correctly on the menu (see page 23).
• Only for GM-P420PCE and GM-P421PCE: Only RGB A
input can be used.
To reproduce images through the other inputs, you need
to install video input unit (IF-C422P1G), which is
separately purchased.
4 MUTING button (page 14)
Use this button to turn off the volume immediately.
Pressing the button again will resume the previous
volume level.
4
1
DISPLAY ASPECT
2
VIDEO A VIDEO B COMPO.
3
RGB B
4
MUTING VOLUME
MENU/EXIT
5
RM-C576 REMOTE CONTROL UNIT
5 MENU/EXIT button
6 Remote signal transmission window
7 ASPECT button (page 15)
8 POWER button (page 14)
9 VOLUME + / – buttons (page 14)
p 2 / 3 / 5 / ∞ buttons
6
7
POWER
8
RGB A
9
p
Use this button to display or erase menus.
While a sub-menu is displayed, pressing this button will
move you one screen back to the preceding menu.
Use this button to switch between aspect ratios. Each time
you press the button, the aspect ratio changes as follows:
REGULAR
PANORAMIC
Use this button to turn on/off the power.
Use these buttons to adjust the volume level.
• The VOLUME – button can be also used to display the
Setup Menu (see page 25).
Use these buttons to select menu items or make
adjustments.
FULL
ZOOM