Electrical Safety Instructions; Transport And Storage; Items Supplied And Accessories - HEIDENHAIN QUADRA-CHEK 3000 Manual De Instrucciones

2.6.3

Electrical safety instructions

WARNING
Hazard of contact with live parts when opening the
product.
This may result in electric shock, burns or death.
Never open the housing
Only the manufacturer is permitted to access the
inside of the product
NOTICE
Damage to internal parts of the product!
Opening the product will result in forfeiture of warranty
and guarantee.
Never open the housing
Only the product manufacturer is permitted to
access the inside of the product
WARNING
Hazard of dangerous amount of electricity passing
through the human body upon direct or indirect
contact with live electrical parts.
This may result in electric shock, burns or death.
Work on the electrical system and live electrical
components is to be performed only by trained
specialists
For power connection and all interface connections,
use only cables and connectors that comply with
applicable standards
Have the manufacturer exchange defective electrical
components immediately
Regularly inspect all connected cables and all
connections on the product. Defects, such as loose
connections or scorched cables, must be removed
immediately
HEIDENHAIN | QUADRA-CHEK 3000 | Installation Instructions | 4/2016
3

Transport and storage

3.1 Overview
This chapter contains all the information necessary for the
transportation and storage of the product and provides
an overview of all the items supplied and the available
accessories of the product.
3.2 Unpacking
Open the top lid of the box
Remove the packaging materials
Unpack the contents
Check the delivery for completeness
Check the delivery for damage
3.3

Items supplied and accessories

Items supplied
The following items are included in the shipment:
Device
Installation Instructions
Storage medium with Operating Instructions
Addendum (optional)
Further information: "Notes on reading the
documentation", page 17
2-D demo part
Accessories
The following accessories are optionally available and can
be ordered from HEIDENHAIN:
Accessories
Duo-Pos stand
For rigid mounting, inclination angle
20° or 45°
Multi-Pos stand
For steplessly variable tilting within
an angle of 90°
Multi-Pos holder
For fastening on an arm, continu-
ously tiltable within an angle of 90°
USB connecting cable
Connector Type A to Type B
Calibration standard
2-D demo part
Adapter connector
HEIDENHAIN TTL to RSF TTL and
RENISHAW TTL
Part number
1089230-02
1089230-03
1089230-04
354770-xx
681047-01
681047-02
1089210-01
21