In Case Of Damage In Transit; Repackaging And Storage - HEIDENHAIN QUADRA-CHEK 3000 Manual De Instrucciones

Some accessories depend on software
options and can only be used in conjunction
with the enabled software option.
Accessories
Fiber-optic cable
With right-angle end
Fiber-optic connection
Two SMA connectors
Holder
With a hole for accepting the
right-angle end of fiber-optic
cables
The product supports only cameras
from camera manufacturer IDS Imaging
Development Systems GmbH.
The product supports only cameras with a
maximum resolution of 2.0 megapixels.
For connection, HEIDENHAIN recommends
the use of USB connecting cables from the
manufacturer IDS Imaging Development
Systems GmbH.
HEIDENHAIN recommends the following cameras
from IDS Imaging Development Systems GmbH:
ID no.: Model designation:
AB00795 UI-1240LE-C-HQ
AB00796 UI-1240LE-M-GL
AB00799 UI-1250LE-C-HQ
AB00800 UI-1250LE-M-GL
AB00797 UI-1240SE-C-HQ
AB00798 UI-1240SE-M-GL
AB00801 UI-1250SE-C-HQ
AB00802 UI-1250SE-M-GL
22
3.4
Part number
681049-xx
681049-xx
681050-xx
3.5
Repackage and store the product carefully in accordance
with the conditions stated below.
Repackaging
Repackaging should correspond to the original packaging
as closely as possible.
Resolution:
1.31 megapixels
1.31 megapixels
1.92 megapixels
1.92 megapixels
1.31 megapixels
1.31 megapixels
1.92 megapixels
1.92 megapixels
Storage of the product
HEIDENHAIN | QUADRA-CHEK 3000 | Installation Instructions | 4/2016

In case of damage in transit

Have the shipping agent confirm the damage
Keep the packaging materials for inspection
Notify the sender of the damage
Contact the distributor or machine manufacturer for
replacement parts
In case of damage in transit:
Keep the packaging materials for
inspection
Contact HEIDENHAIN or the machine
manufacturer
This applies also if damage occurred to
requested replacement parts during transit.

Repackaging and storage

Attach all mounting parts and dust protection caps to
the product or repackage them in the same way they
were originally shipped from the factory.
Repackage the product such that it is protected from
impact and vibration during transit
Repackage the product such that it is protected from
the ingress of dust or humidity
Place all accessories that were included in the
shipment in the original packaging
Further information: "Items supplied and
accessories", page 21
Include the Addendum (if it was included in the
items supplied), the Installation Instructions and the
Operating Instructions
Further information: "Storage and distribution of the
documentation", page 18
If you return the product for repair to a service
agency:
Ship the product without accessories,
without measuring devices and without
peripherals
Package the product as described above
Observe the specified ambient conditions
Inspect the product for damage after any transport or
longer storage times