Roadstar TT-540 Manual De Instrucciones página 3

WARNINGS
The exclamation point within the triangle is a warning sign alerting the
user of important instructions accompanying the product.
The lightening flash with arrowhead symbol within the triangle is a warning
sign alerting the user of "dangerous voltage" inside the unit.
To reduce the risk of electric shock, do not remove the cover. No user
serviceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a long period
of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary circuit and
does not disconnect the whole unit from the mains in OFF position.
Ensure all connections are properly made before operating the unit.
This unit should be positioned so that it is properly ventilated. Avoid placing
it, for example, close to curtains, on the carpet or in a built-in installation
such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
English 1 2 English
TT-540
WOODEN TURNTABLE WITH AUX-IN / OUT
INSTRUCTION MANUAL
Please read this instruction manual carefully and familiarize yourself with your new Audio System
before using it for the first time. Please retain this manual for future reference.
LOCATION OF CONTROLS
1) SPEAKER BOX
2) SPEAKER CONNECTOR
3) TURNTABLE
4) SPINDLE
5) POWER ON / OFF - VOLUME CONTROL
6) DC 12 V POWER CONNECTOR
7) SPEAKER OUTPUT
8) SUBWOOFER OUTPUT
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect this
unit to the mains.
MAINS (AC) OPERATION
This unit is designed to operate on 12V DC current only. Connecting it to other power sources
may damage the unit.
CAUTION
To prevent electric shock disconnect from the mains before removing cover. No user serviceable
parts inside. Refer servicing to qualified service personnel.
SAFETY PRECAUTION
Do not allow this unit to be exposed to rain or moisture.
Mains Supply (AC-Adapter): AC- 100-230V 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
AC POWER OPERATION
Connect the Power Adapter to the DC socket on rear side of the unit and plug to a mains power
inlet 230V AC ~ 50 Hz.
TURNTABLE OPERATION
Preparation
Open the Record Player Cover. Plug one end of the supplied Speaker Connecting Cable into
the SPEAKER OUT Jack on the record player and the other into the SPEAKER IN Jack of the
speaker Lid. Remove the 12V DC POWER ADAPTOR from the white box (located inside the
9) TONE CONTROL
10) LINE OUT
11) LINE IN
12) SPINDLE ADAPTER
13) TONEARM
14) 33/45/78 RPM SPEED SELECTOR
15) ARM REST
16) HOOK CLOUSURE