Programmed Play; Cleaning And Maintenance - AEG SRR 4311 Instrucciones De Servicio

(Stop) (17)
1. The CD stops.
2. USB CARD switching:
• When the machine is in USB mode, keep the key
pressed down for approx. 3 seconds until CARD lights
up in the display. The device is now in CARD mode.
• Hold the button down for approximately 3 seconds until
the letters CARD disappear from the display. The device
is now in USB mode.
MODE (10)
Press once = (the REP. emits a fi xed light) the current
track is repeated continuously.
Press twice = (the REP
CD is played continuously.
Press three times = the display (13) contains the word RND and
the track number that is to be played fi rst.
All tracks are played back in random order.
Note: Random playback (RND) always
begins with the fi rst track on the CD.
Press four times = all functions are cancelled. The normal play
mode is resumed.
Only for CDs in MP3 format
Press once = the current track is repeated continuously
(REP. appears in the display).
Press twice = the whole CD is played continuously
(REP
Press three times = the selected folder of the MP3 CD is
repeated continuously (REP. ALBUM
appears in the display). In order to select a
folder, please proceed as described in the
„Selecting a Folder" section above.
Press four times = the display (13) contains the word RND,
MP3 and the track number that is to be
played fi rst. All tracks are played back in
random order.
Press fi ve times = the function is deactivated and the CD is
played in the normal mode.

Programmed Play

This can be used to program any desired sequence of tracks.
1. Press the key (17).
2. Press the PROG key (9). The number „P01" (storage loca-
tion) and the symbol PROG. fl ash in the display (13). Use
the I / DIR- / I / DIR+ buttons (15/16) to select the
desired track and then press the PROG button (9) again.
The display changes to memory slot P02.
3. Select the next track with the I
and press the PROG key again. Repeat the procedure until
all the desired tracks are selected.
4. Press the II key (14). The playback starts. The selected
track numbers are shown in the display in the correct order
and the symbol or
button to pause briefl y the playback.
42
05-SRR 4311 AEG 42
emits a fi xed light) the whole
appears in the display).
/ DIR- / I / DIR+ key
MP3 and PROG light up. Press this
5. Press once the key (17) to stop the playback while
retaining the program.
6. To resume the playback of the program press fi rst the
PROG key (9) once and then the
7. In order to delete the programme, hold the PROG. key
(9) down for approximately 3 seconds in stop mode. The
PROG. control lamp goes out.
The device stops automatically once the entire sequence of
programmed tracks is completed. The programmed order of
tracks remains in the memory until you change to a different
mode, remove the CD from the CD compartment or switch off
the device.
It is also possible to combine the programmed tracks with the
REPEAT function. After you have programmed and started the
device, please press the MODE button (10) up to three times and
then you can use the functions as described under MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play one
of these CDs, proceed as described under „Playing CDs/MP3".
Tracks can be programmed as described under „Playing Back
Programmed Tracks".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not a
malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
II key (14).
21.04.2006, 9:37:53 Uhr