Extra Rinse; Delay Function - Magic Chef MCSTCW16W4 Manual Del Usuario

NOTE: If you want to cancel the Delay Start Function after it has started, power the unit off and reset all
functions before restating the washer�
2� PAUSE: Push " " (Pause) to temporarily stop the wash cycle if additional items of clothing need to be
added� Push it again to restart�
WARNING: When the washer is running, wait for the tub to stop moving completely before you open the lid�
3� EXTRA RINSE: Press "
be done after wash program is set, before pressing (Start/Pause) to begin the cycle�
4� CONTROL LOCK: Press and hold " " and "
function� The digital display will show "CL"� If the washer is running, or has a Delay Start set, the "CL" and
remaining time or Delay Start time will alternate on the display� Repeat pressing and holding the Temp and
Program buttons to deactivate� When Control Lock is activated, no buttons will function except for POWER
and the ability to deactivate Control Lock as described above�
WARNING:
This function is useful to prevent children from changing the operation status of the unit�

DELAY FUNCTION

The washing machine can be set for a delayed start� The delay can be set in 1 hour increments from 1-24 hours,
and then in 6 hour increments up to 48 hours� To set the delay start feature:
1� Press the ON/OFF button to turn the washer ON�
2� Properly hang the drain hose and turn on the water tap�
3� Load the laundry and detergent in the washer�
4� Select the appropriate water level�
5� Select the desired program and functions�
6� Press the delay button to set the number of hours to delay the start of the wash cycle�
7� Close the lid and press the Start/Pause button�
Once the delay function is activated, the Delay indicator light will flash, and all other lights will turn off� To
check the status of the delay preset, push and hold the Delay button� Release the Delay button to return to the
Delay start mode�
To cancel the Delay setting, press the ON/OFF button�
POWER LOSS MEMORY FUNCTION
In the event of the loss of power, the washer will automatically resume operation from previous settings when
power is restored�To cancel the Delay setting, press the ON/OFF button�
" (Extra Rinse) if you wish the washer to run an additional rinse cycle� This should
" (Temp� and Program) simultaneously to activate this
13