Setting Up Your Scale Step By Step; Instruction For Battery Installation - WUNDER RS Manual De Empleo

ENGLISH
Setting the time for auto time-off - 120/180/240/300/off (seconds)
Buzzer ON（beep on）/OFF（beep off）
Save the settings
For Example: Set up 180s AUTO-OFF time and Buzzer OFF
Step 1. Press HOLD for 3 seconds to enter setup mode.
Step 2. Press ZERO to enter A.OFF mode when A.OFF is displayed
Step 3. Press HOLD to select 180 S which means AUTO-OFF TIME is 180 seconds.
Step 4. Press ZERO to decide and return to A.OFF mode and press HOLD to shift to BEEP setup mode.
Step 5. Press ZERO to enter BEEP setup mode and press HOLD again to select between ON and OFF.
Step 6. Press ZERO to decide and return to BEEP setup mode.
Step 7. Press HOLD to select END and press ZERO to finish setting.
RS uses six AAA size alkaline batteries. Please read the following instruction before using the scale.
2. Find the battery cover on the backside of the scale
3. Take out the battery case
RS RÈV.07 12/02/2019

8. SETTING UP YOUR SCALE STEP BY STEP

9. INSTRUCTION FOR BATTERY INSTALLATION

2. Remove the battery cover.
4. Installing new AAA size batteries.
28