Safety Tips; Maximum/Minimum Readings - HYGIPLAS F306 Manual De Instrucciones

Safety Tips

• Clean the probe immediately after each measurement to avoid
cross contamination
• Do not use inside an oven�
Operation
Temperature Measurement
1� Press [HOLD/ON_-OFF] button once to switch thermometer
on�
2� Insert probe approximately 25mm (1") deep into the
foodstuff�
3� Hold the thermometer stable for an accurate reading
Units of Measurement
1� Press and hold [MAX-MIN/°C -°F] button for about 3 seconds,
then release to alternate between Centigrade and Fahrenheit�
Data Hold
1� Press [HOLD/ON-OFF] button once to retain reading, °C /°F
symbol flashing.
2� Press [HOLD/ON-OFF] button again to release HOLD function

Maximum/Minimum Readings

The thermometer can store and display the maximum and mini-
mum temperature readings taken since the last reset:
1� Press [MAX-MIN/°C-°F] button. The MAX icon flashes and the
maximum temperature taken displays on the screen�
2� Press [MAX-MIN/°C -°F] button again. The MIN icon flashes
and the minimum temperature taken displays on the screen�
3� Press the button again to resume normal operation�
Note: To reset the memory turn off the thermometer.
Always reset the memory before taking new readings to
ensure accurate readings.
4