Installation; Operation - Dometic WAECO TropiCool TB-W203S-71 Instrucciones De Uso

TB-W203.book Seite 13 Montag, 23. Januar 2012 1:54 13
TropiCool TB-W203
6

Installation

Note the following instructions when fitting the built-in cooler in the vehicle:
 Install the cooler in a dry, sheltered place
(Dimensions: see fig. 1, page 3).
 Avoid installing the devices next to heat sources such as heaters,
gas ovens, hot water pipes, etc.
 The device must be installed so that heated air from the cooling unit can
dissipate easily. Therefore make sure there is adequate ventilation.
7

Operation

Before starting your new cooler for the first time, you should
clean it inside and outside with a damp cloth for hygienic
reasons (see "Cleaning and maintenance" on page 14).
7.1 Energy saving tips
 Do not open the cooler more often than necessary.
 Do not leave the lid or door open for longer than necessary.
7.2 Using the cooler
Like every refrigerator, your cooler must be properly ventilated
so that any heat created can dissipate, otherwise it cannot be
guaranteed to work properly.
➤ Switch on the cooler using the power switch (see fig. 2, page 3, A).
✓ The red LED on the power switch lights up and the temperature inside
the cooler falls to 5 °C at most.
Ensure that the objects placed in the cooler are suitable for
cooling/warming to the selected temperature.
Installation
13