Honeywell Home RTH6360 Serie Guía De Instalación Rápida página 11

Program Schedule
You can program four time periods each day, with different settings for weekdays
and weekends. We recommend the pre-set settings (shown in the table below),
since they can reduce your heating/cooling expenses.
Wake - Set to the time you wake up and the
temperature you want during the morning, until you
leave for the day.
Away - Set to the time you leave home and the
temperature you want while you are away (usually an
energy-saving level).
Home - Set to the time you return home and the
temperature you want during the evening, until
bedtime.
Sleep - Set to the time you go to bed and the
temperature you want overnight (usually an energy-
saving level).
NOTE: To temporarily or permanently override any of the above program
schedules, see page 12.
To adjust program schedules
1
Press Menu on your thermostat.
2
If PROG is displayed, press Select. If
Hold is displayed, press +, then Select.
Then ON is displayed. Press Select.
3
Press + or - to select day or set of
days to edit. Press Select.
4
Press + or - to select a schedule
period to edit (Wake, Away, Home,
and Sleep). Press Select.
5
ON is displayed. Press Select to keep
the schedule period on. Or press
+ and then Select to turn off the
schedule period.
6
Time starts blinking. Press + or - to
adjust the schedule period start
time. Press Select.
7
Temperature starts blinking. Press
+ or - to adjust the "Heat" setpoint
temperature. Press Select. Press +
or - to adjust the "Cool" temperature
setpoint. Press Select.
8
Repeat steps 4 through 7 for the
remaining schedule periods.
9
Press Home when you're finished to
save program settings and return to
the home screen.
Wake
(6:00 am)
(8:00 am)
Home
(6:00 pm)
Sleep
(10:00 pm)
11
RTH6360 Series
Heat
70 ° 78
62 ° 85
Away
70 ° 78
°
62 82
The above table is only an example.
Cool
°
°
°
°