Insertion Tool; Selecting The Right Insertion Tool; Conical Moil Point; Chisels And Spades - Atlas Copco SB Serie Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions
Use a ¼" hydraulic hose with a JIC connection as a
proper water hose. The water consumption at 4 bar
is 6.6 l/min. Contact your nearest authorised
workshop for futher instructions.

Insertion tool

Selecting the right insertion tool

Conical moil point

Chisels and spades

Blunt tool

16
Very good penetration
●
Regular spread of
●
wedge action
● No torsion effect
Very good spread of
●
wedge action
● Good penetration
Torsion effect
●
Very good energy
●
application
● Optimum breaking
effect
No torsion effect
●
© 2008 Atlas Copco Construction Tools AB | No. 9800 0648 90e | 2008-11-03
SB 52, 102, 152, 202, 302, 452, 552

Mounting and dismounting the insertion tool

WARNING Running engine
Changing the inserted tool while the carrier's engine
is running can cause serious injury.
► Secure the carrier against involuntary activation.
1. Shut the carrier's engine off before changing the
inserted tool.
2. Mount (and dismount) the inserted tool with a
lifting strap to reduce risk of crushed body parts.
Some insertion tools are heavy, therefore lift out
the inserted tool in a safe way.
3. Check that the lock buffer is not worn out or
damaged.
The lock buffer in the tool retainer lock is made
of plastic and can melt when working in a hot
environment. If this occurs, change the standard
lock pin. You will find an optional spring pin to
use instead, in the spare parts list.