12.4
Place the Ballast box loose on the foot.
Mount the two black connectors inside the box 4-pole to
4-pole, 3-pole to 3-pole (1), and connect the small white
connector (2) fixate the plate with 4 screws outside the
box (3).
Mount the Ballast box onto the foot, 3 screws (4).
Close and lock the lid.
1
4
714598 rev 5
12.5
Fasten the harnesses and the cable into the ties (6) in the
pillar according to the picture below.
2
3
6
25