Hkoenig HSX16 Manual De Utilización página 3

The food material needs to be cut into proper pieces so
8.
as to pass through the feeding chute to extract Please
remove the hard core, seed, skin or shell of the food
before use.
Proper amount of force shall be used to push the food
9.
material in, not excessive but sufficient to have it cut off
exactly.
The filter, end cap, auger or feedign chute may be dyed
10.
by the juice during operation, which is a normal
phenomenon and has no effect on edibility and does no
harm to health.
This product has safety protection after long time use
11.
more than 20min, it will stop automatically . And in such
case, rest it for 20-30 minutes before restarting it, so as
to cool the motor down and prolong product service life
In case that current limit protection is triggered or the
12.
motor is locked and stops automatically, disconnect the
power supply and keep the switch in position "off", and
press Rotate Backwards button on the power switch,
and then discharge the food material and then press
Rotate Forwards to restart the machine. If the problem
continues, it is recommended to remove any food
material inside feeding chute before restart so as to
protect the motor.
Upon completion, remove any removable part only after
13.
the motor/auger has stopped rotating and the power
has been disconnected.
Any part in contact with food material is clean, safe and
14.
reliable in compliance with related food hygiene codes.
Do not put the machine into or use water or any other
15.
liquid for washing, so as to prevent any damage.
Do not use any steel wool, abrasive cleaning agent or
16.