Hkoenig HSX16 Manual De Utilización página 7

Prior to first use, thoroughly clean any parts in contact with food material.
Operation Procedure
Operate this product by following the steps below:
Ÿ
Button Operation Description:
Rotate Forwards button: start work
•
"0" button: To stop and shut down the machine.
•
Reverse button: For use in case of residue blockage or motor
•
locking. (Tips: in case of residue blockage or motor locking,
press and hold Rotate Backwards button for approximately
3 seconds to rotate the auger reversely and then release it;
press Rotate Forwards button to resume normal operation.
Lift locking ring (2) and insert feeding chute (1)
1
into main body. Then press down locking ring(2) to fix
Align the metal rod of the auger with the opening in the Main
Body.
2 Push it in. If the auger will not go in all the way, slightly rotate
it and
try again.
With the wide opening first, align the notches on filter
3
to the openings in the feeding chute. Push it in.
While pushing the end cap into the feeding chute, align the
notches
4
on the end cap to the openings in the feeding chute.
Turn the Juicer Cap counter clockwise
Place juice container under feeding chute with its opening
5 right below the outlet. (juice baffle should be mounted in the
container in advance to seperate foam in the juice)
6 Place pulp container below the end cap outlet, close the
juice container.