Hardware Installation - Conceptronic 128CC Guia De Inicio Rapido

ENGLISH
will be prompted to the 'Network' dialog box again. Click 'Close'. The installation program will
continue automatically. When finished, Windows will prompt you to restart your computer.
Click 'Yes' to continue.
2. Application Software Installation
1. Insert the application software disk or compact disc into your computer.
2. Go to: Start-> Run
3. If you are using compact disc to install the application software, type in the CD-ROM drive let-
ter followed by 'winnt\ntap\setup'. Or if you are using disk, type in 'a:setup. The 'Configuration
Utility' installation program will proceed automatically.
4. Follow the on-screen instruction to continue. When finished, Windows will prompt you to re-
start your computer. Click 'Finish' to restart your computer.
5. Remember to insert the PC card in the PCMCIA socket of your computer when you are re-
starting your computer. See the back side for the section titled 'Hardware Installation'.

3. Hardware Installation

1. Locate the PCMCIA slot of your laptop.
2. Align the end of the cable to the exposed end of the ISDN TA PC Card. Align the PC Card
toward the PCMCIA slot.
- 9 -