Listening To Dab Digital Radio - Onkyo LS5200 Manual De Instrucciones

> Before Start > Part Names
Easy M (Middle of the road music)
Light M (Light classics)
Classics (Serious classics)
Other M (Other music)
Weather
Finance
Children (Children's programmes)
Social (Social affairs)
Religion
Phone In
Travel
Leisure
Jazz (Jazz music)
Country (Country music)
Nation M (National music)
Oldies (Oldies music)
Folk M (Folk music)
Document (Documentary)
0 The information displayed may sometimes not match the
content being broadcast by the station.
3. When a station is found, the station flashes on the
display. Press ENTER (a) while this is happening to start
receiving that station. If you don't press ENTER (a), the
unit continues to search for another station.
0 If no stations are found, the message "Not Found" is
displayed.
0 Unusual characters may be displayed when the unit
receives unsupported characters. However, this is not a
malfunction. Also, if the signal from a station is weak,
information may not be displayed.
28
> Install > Initial Setup

Listening to DAB Digital Radio

1. Press TUNER on the remote controller repeatedly to
select "DAB" on the display.
0 The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band 3 for the
multiplexes (i.e., stations) available in your area.
0 Once the scanning process is complete, the first
station that was detected is selected.
0 If a new DAB station is introduced, or you move to a
new area, press the button on the remote
controller, then in the Setup menu displayed set "6.
Miscellaneous" – "Tuner" – "DAB Auto Scan".
2. Select the desired radio station with the cursors
buttons (a) on the remote controller.
Changing the order stations are displayed
You can sort the abailable stations alphabetically or by
multiplex.
1. Press MODE (e) repeatedly to set the method for sorting
the display order from the following.
Alphabet (default setting): Sort stations alphabetically.
Multiplex: Sort stations by multiplex.
Displaying DAB Radio Information
1. Press the button (b) repeatedly to display more
information about the selected DAB station.
DLS (Dynamic Label Segment): When tuned to a
station that's broadcasting DLS text data, the text will
scroll across the display.
Program Type: Displays the type of program.
Bit Rate and Audio Mode: Displays the station's bit rate
and audio mode (Stereo, Mono).
Quality: Displays the signal quality.
0 - 59: Poor reception
> Playback
Advanced Setup | Firmware Update | Others
60 - 79: Good reception
80 - 100: Excellent reception
Multiplex Name: Displays the name of the current
multiplex.
Multiplex Number and Frequency: Displays the
number and frequency of the current multiplex.
/
E
N