Reflecta CyberView X5 MF Manual De Instrucciones página 8

Inserting Mounted Slides (Continued...)
2. set scan settings and preferences see Page 10
3. see scanning directions on page 10
note: some slide mounts are thin and will require you to apply gentle pressure to the edge
of the mount after insertion for it to register in the scanner, you will know it is detected by
the Preview bar in the user interface, the icons will illuminate in color
no slide detected
inseeting Filmstrips
1. insert the filmstrip with emulsion side up from the left film entrance.
2. scanner will auto load and position the first frame in the center of the
viewing window, if the first frame is not at the correct position, please move
it by clicking "ForWard" or "reVerse" button and you can also move it via
the fine tuning function in CyberView interface. see Page 22
3. see scanning directions on page 10
You can load the film easily by holding around the 3rd frame of the filmstrip
when inserting, film strips/rolls are inserted facing dull side (emulsion) up
8
slide detected