Amica PPCG4.0ZpZt Manual De Instrucciones página 40

INSTALLATION
Carefully read the operating instructions supplied and follow all guidelines.
You are dealing with gas. The appliance must be supplied with the type of gas speci-
fied by the manufacturer.
Only a qualified person must install the appliance.
Information on the type of gas for which the appliance is designed is given on the
nameplate.
Adapt the hob to a particular type of gas
This may be performed by an installer with the appropriate qualifications only.
If the gas, which the hob will be supplied with is different from the gas type specified by the
manufacturer, i.e. G20 (2H) 20 mbar, replace the burner nozzles and adjust the flame.
Hobs supplied by the manufacturer are fitted with burners designed for the gas speci-
fied on the nameplate and in the warranty.
The nameplate is located on the underside of the bottom cover.
In order to adapt the hob to another gas type:
• replace the nozzles (see table),
• adjust the valves for a reduced flow.
40