Maxi-Cosi Citi Side Protection System Modo De Empleo/Garantia página 5

Idiomas disponibles

EXI0280_Citi_SPS_I_BW:-

• Ensure that the seat is not damaged by wedging it between or underneath heavy luggage, adjustable seats or

slamming the car door, etc.

• NEVER place a baby on your knee in the car. Due to the enormous forces released in an accident, it will be

impossible to hold on to the baby.

• Never use the same 3-point seat belt to secure yourself and the baby in the car.

• No alterations may be made to the Maxi-Cosi Citi Side Protection System (seat and harness belt) as this could

effect part or the overall safety of the seat. In such a case the manufacturer cannot guarantee the safety of your

child.

• It is advisable not to leave your child in the Maxi-Cosi Citi Side Protection System for hours at a time. To aid the

natural development of your child, it is important that the child be placed regularly flat on its back or stomach.

• The Maxi-Cosi Citi Side Protection System must not be used without the cover. Always use an ORIGINAL

Maxi-Cosi Citi Side Protection System cover, as the cover contributes to the safety of the seat. The energy

absorbing foam in the shell is essential for the safety and must not be removed.

• Everyone travelling in the car must wear a seat belt. Passengers on the back seat not wearing a seat belt could

be dangerous to the child in the front seat.

• In order to prevent damage to the cover do not remove the Maxi-Cosi logo.

Questions

If you have a warranty claim or any other questions, please contact your supplier or importer (see address list on

the back cover of this instruction manual).

Securing the baby in the Maxi-Cosi Citi Side Protection System (fig. A-D)

Never leave your child unattended in the seat. This also applies when using the seat outside the car.

• Open the belt buckle (press the red button).

• Ensure the baby is placed correctly in the seat, its back firmly against the back of the seat. The ergonomic shape

of the shell ensures the baby does not slump in the seat.

• The shoulder belts must fit correctly over the shoulders of the baby.

• Slide both plastic tongue sections together (fig. A1).

• Insert both tongue sections in the buckle, you will hear a loud click locking them in position (fig. A2).

• Pull the adjuster belt at the front of the shell tight, so that the child is firmly secured with the harness belt (the

belt system).

21-07-2009

10:57

English

Pagina 10