HIKOKI DB 3DL2 Instrucciones De Manejo página 7

GENERAL POWER TOOL SAFETY WARNINGS
△ WARNING
Read all safety warnings and all Instructions.
Failure to follow the warnings and Instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and Instructions fo
eference.
『
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep wo k area clean and well lit.
『
Cluttered or dark areas invite accidents
b) Do not ope ate power tools In exploslve
『
atmosphe es, such as In the p
『
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away whlle
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug In any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or g
surfaces, such as pipes, radiators,
refrlgerato S・
『
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to
conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
ca yi ng, pulling or unplugging the power tool.
『『
Keep cord away from heat, oil, sha
moving parts.
Damaged or entangled cords Increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension co d sultable for outdoor use.
『
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
Is unavoldable, use a resldual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the Influence of drugs, alcohol or
medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
(Original instructions)
c) Prevent unintentional starting. Ensure the
switch Is In the off position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools with your finger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench befo
future
『
turning the powe
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothlng or
jewelle
esence of
away from moving pa
『
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection of
dust extraction and collectlon facilities, ensure
these are connected and properly used.
Use of dust collectlon can reduce dust related
hazards.
4) Powe
a) Do not force the power tool. Use the correct
power tool for your appllcatlon.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does
ounded
not turn It on and off.
『
anges and
Any power tool that cannot be controlled with the
『
switch Is dangerous and must be repaired.
c) Disconnect the plug f
and/o
aln or wet
before making any adjustments, changing
『
accessories, or sto
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
chlldren and do not allow persons unfamlllar
p edges or
with the power tool or these Instructions to
『
operate the powe
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for mlsallgnment
0
and any othe
power tools operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. In accordance with these Instructions,
taking Into account the working conditions
and the work to be performed.
Use of the power tool for operations different
from those Intended could result in a hazardous
situation.
tool on.
『
y. Keep you hair, clothing and gloves
『 『
ts.
『
tool use and care
『
om the power sou
『
the battery pack from the power tool
『
Ing power tools.
『
tool.
『
binding of moving parts, breakage of parts
『
condition that may affect the
『
English
e
『
ce
『
7