RISCO Group ProSound Manual De Instalación Y De Funcionamiento página 10

Miscellaneous: Siren
Quick Keys Parameter
[8][2][2] Strobe Blink
Defines the number of times that the strobe will blink in a minute .
[8][2][2][1]..[5] Strobe Blink options
[1]: 20 times per minute.
[2]: 30 times per minute.
[3]: 40 times per minute (Default)
[8][2][3] Strobe Arm Squawk
The time that the strobe will blink when the system is armed.
Note: If the sounder's squawk strobe is defined as NO (Refer to Adding / Deleting
the Outdoor Sounder section) this parameter will be ignored.
[8][2][4] Siren LED
Defines the operation mode of the Status LED2.
[8][2][4][1]
Always On
The status LED2 is always on
[8][2][4][2] Always Off
The status LED2 is deactivated
[8][2][4][3] Follow Arm (Default)
The status LED2 is activated when any of the sounder selected partition is armed
(Away or Stay mode)
[8][2][4][4] Follow Alarm
The status LED 2 is activated after any alarm condition
[8][2][5] Proximity Level Response
Defines the time (seconds) for which a proximity violation must exist before the
sounder will trigger an anti approach alarm. The option 0 indicates that the
proximity is deactivated.
[8][2][6] Battery Load Test
Enables to set the time period that the ProSYS will automatically generate a Load
test on the battery.
[8][2][6][1] Never
The system will not set a battery load test
[8][2][6][2] Every 24 Hours (Default)
The system will set a battery load test every 24 hours.
[4]: 50 times per minute
[5]: 60 times per minute.
Default: 01 Range: 01-20
(seconds)
Default: 3 Range: 0-9 seconds
10