Technical Specifications; Ordering Part Numbers - RISCO Group ProSound Manual De Instalación Y De Funcionamiento

TAM PER
INT EXT
(To Int.
Tam per)
ON
CONFIG

Technical Specifications

Input DC Power
Standby Current Consumption
Battery charging current
Operating Current Consumption
(Sounder + Strobe)
Speaker Sound level
Tone frequency
Strobe light
Strobe lens
Strobe flash rate
Back-up battery (rechargeable)
Low battery protection
Ingress Protection
Operating Temperature
Humidity
Tamper contact
Proximity Anti foam contact
Housing material
Dimension (L x W x H)
Weight (without battery)
Compatibility
ProSYS compatibility

Ordering Part numbers

RS200WAP000A Outdoor polycarbonate sounder, amber lens cover, with anti-approach protection
RS200WA0000A
Outdoor polycarbonate sounder, amber lens cover
To
Battery
BLK
RED
TRIG STROB
POW ER
C - AUTO
C + M AN
ON
1 2 3 4
1 2 3 4
ID1
LED2
Figure 2 – BUS Configuration
Regulated 13.5-14.2V, 200 mA maximum
54 mA + charge current
140 mA maximum
1.6A
106 dB @ 3 meters
1500-1800 Hz
Surface Light Technology SMT LED with 6000 mcd
Polycarbonate, available in amber, red or blue
60 times per minute (maximum)
SLA (Sealed Lead Acid) rechargeable 12V, 2.2 A/H, UL
approved,
Max Size (L x W x H): 17.8 cm x 6.4 cm x 3.5 cm
Automatic disconnection below 10.5 VDC
IP 43, IK 6
-25°C to 70°C (-13°F to 158°F)
95% maximum
0.5 A, 24 V, N.C. termination or internal EOL resistor
0.1 A, 24 V, N.C. termination
Polycarbonate with UV protection
30.5 cm X 21.8 cm X 11.6 cm
2.03 kg
All control panels
4-wire BUS, up to 300m from main panel
8
To Internal
Speaker
To
ProSYS
Panel
BUS