Features; Assembly - Ryobi RY40805 Manual Del Operador

PRODUCT SPECIFICATIONS
Motor .................................................................. 40 Volt DC
Clearing Width ............................................................ 20 in.
Clearing Depth ........................................................... 10 in.
KNOW YOUR SNOW BLOWER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
BATTERY COVERS
The battery covers protect the battery ports from moisture
and debris.
BATTERY STORAGE
The battery storage area offers a convenient place for stor-
ing your battery when not in use, or to store an extra battery
pack.
UNPACKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Snow Blower
Chute Rotation Lever (Upper and Lower Rods with Hitch Pin)
Chute Deflector With 2 Washers and Phillips Head Screws
Assembly Tool
Operator's Manual

FEATURES

Wheel Size .................................................................... 8 in.
Throwing Distance ............................................. Up to 25 ft.
CHUTE DEFLECTOR HANDLE
The chute deflector handle allows you to change the distance
that snow will discharge from the chute.
CHUTE ROTATION LEVER
The chute rotation lever allows you to choose the direction
that snow will discharge from the snow blower. The lever
allows the chute to rotate up to 180º.
LED HEADLIGHTS
LED headlights are located on the front of the unit to illumi-
nate your path in low light conditions. The lights will operate
whenever the motor is running.

ASSEMBLY

WARNING:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not insert battery pack until assembly is complete
and you are ready to use snow blower. Failure to comply
could result in accidental starting and possible serious
personal injury.
6 — English