M-system MGK 600 Instrucciones De Uso página 66

C
F
Fig. 3.1
66
BURNERS AND GRIDS
S
CORRECT REPLACEMENT
OF THE BURNERS
It is very important to check that the
burner flame spreader F and the cap C
have been correctly positioned (see figs.
3.1 and 3.5 ).
Failure to do so can cause serious
problems.
Check that the electrode "S" (fig. 3.1) is
always clean to ensure trouble-free
sparking.
Both the probe and ignition plug must
be very carefully cleaned.
Fig. 3.2
These parts can be removed and
cleaned with appropriate products.
After cleaning, the burners and their
flame spreaders must be well dried
and correctly replaced.
It is very important to check that the
burner flame spreader and the cap
have been correctly positioned.
Failure to do so can cause serious
problems.
In appliances with electric ignition
keep the electrode clean so that the
sparks always strike.
Note: To avoid damage to the elec-
tric ignition do not use it when the
burners are not in place.
A
B
Fig. 3.3