Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GDS 18V-1000 Professional Manual Original

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Application tools can become hot during operation.
u
There is a risk of burns when changing the application
tool. Use protective gloves to remove the application
tool.
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
®
The Bluetooth word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.

Technical Data

Impact Wrench
Article number
Rated voltage
A)
No-load speed
– Setting 1
– Setting 2
– Setting 3
A)
Impact rate
– Setting 1
– Setting 2
– Setting 3
A)
Torque
Bosch Power Tools
With the Bluetooth
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
®
, a
(2) Rotational direction switch
(3) Bluetooth® Low Energy Module cover GCY 42
(4) Ladder clip
(5) Rechargeable battery
®
in the vicinity of
(6) Battery release button
(7) User interface
(8) On/off switch
(9) Handle (insulated gripping surface)
(10) Application tool (e.g. screw nut)
(11) Status indicator for power tool
(12) Mode indicator
(13) Worklight button (GDS 18V-1000,
(14) Mode button (GDS 18V-1000 C, GDS
(15) Worklight
(16) Speed button
(17) Speed preselection indicator
A) Accessories shown or described are not included with the
GDS
18V-1000 18V-1050 H
3 601 JJ8 3.. 3 601 JJ8 5.. 3 601 JJ8 0.. 3 601 JJ8 1.. 3 601 JJ8 2..
V= 18
-1
min 0–800 0–800
-1
min 0–1200 0–1200
-1
min 0–1750 0–1750
-1
min 0–1600 0–1600
-1
min 0–2400 0–2400
-1
min 0–2600 0–2600
®
Low Energy Module GCY 42 inserted,
A)
A)
User interface
GDS 18V-1050 H)
18V-1000 PC, GDS 18V-1050 HC)
product as standard. You can find the complete selection of
accessories in our accessories range.
GDS GDS
18V-1000 C 18V-1000 PC
18 18
0–800 0–800
0–1200 0–1200
0–1750 0–1750
0–1600 0–1600
0–2400 0–2400
0–2600 0–2600
1 609 92A 5N5 | (06.08.2020)
English | 17
®
wire-
A)
GDS GDS
18V-1050 HC
18 18
0–800
0–1200
0–1750
0–1600
0–2400
0–2600