Description Of Use; Important Safety Instructions; Packaging Content - Simon 0603302-039 Nstrucciones De Instalacion

ENGLISH

DESCRIPTION OF USE

The simple totem charging accessory (Art.0603302-039) has the capaci-
ty to mount one rubber box of any Simon reference, allowing the combi-
nation of different sockets (Mode 2 and / or Mode 3) and the possibility of
making on the same post any type of recharge slowly or semi-fast depen-
ding on the reference assembled.
The simple totem is a simple and intuitive solution and additionally, it is
designed to fit ideally in both indoor and outdoor environments such as
business, hotel, public and commercial parking solutions among others.

IMPORTANT SAFETY INSTRUCTIONS

The charging pole is designed to be installed in both indoor and outdoor
areas. In each diff erent type of installation, the equipment must be installed
safely, in addition to ensuring adequate protection.
- Do not install the charging point where falling objects could damage
the equipment.
- The surface on which the totem will be placed must withstand the
mechanical forces.
- Do not install the equipment on unstable ground.
- Do not install the totem near areas where water or other liquid can
penetrate the equipment.
- Do not modify the equipment without Simon's consent. In doing so,
Simon will decline any responsibility and the warranty will be voided.
- Do not carry out repairs or manipulations while the equipment is recei-
ving power.
- Only trained and qualifi ed personnel will have access to low voltage
electrical parts.

PACKAGING CONTENT

The items described below are included in the product packaging:
- Simple totem::
Installation instructions:
Anchor kit: Template x1
Nut x8
Washer x8
Threaded rod x4
30 mm
FEATURES
Mounting capacity: two units of Simon rubber wallbox.
Installation environment: Indoor or outdoor.
Accessory for cable support included.
Maintenance door: to assemble and connect the wallboxes and the totem
itself.
Note 1: No wallbox is included with the totem reference. The wallbox must be
ordered independently depending on the required functionalities.
Note 2: No adapters are supplied with the totem and no adapters shall be used,
except those approved by the EV or EVSE manufacturer.
TOTEM DIMENSIONS
226mm
7
Triangular Wrench x1
Screws M5 x2
1510mm
270mm