ChiQ CQHDU30T1T1W Manual De Instrucciones página 3

ELECTRICAL REQUERIMENTS
Observe all governing codes and ordinances.
It is the customer's responsibility: To contact a qualified electrical installer. To assure
that the electrical installation is adequate and in conformance with local codes and
ordinances.
This unit must be grounded.
Do not ground to a gas pipe.
Check with a qualified electrician if you are not sure range hood is properly grounded.
Save Installation Instructions for electrical inspector's use.
BEFORE INSTALLING YOUR RANGE HOOD
Please read the instructions carefully.
Unpack the hood and check that all functions are working. Ensure that the voltage (V)
and the frequency (Hz) indicated on the serial plate match the voltage and frequency
at the installation site.
Check that the area behind the installation surface to be drilled is clear of any electri-
cal cables or pipes, etc.
Please take care to protect the surfaces during installation.
Protect the cooktop surface below with cardboard, to prevent damage occurring
whilst the range hood is being installed above.
The manufacturer shall not be liable for failure to observe all safety regulations in
force for the correct and normal operation of electrical parts.
DESCRIPTION
1. Air duct assembly
2. Main body
3. Filter assembly
2