Vertical Discharge; Horizontal Discharge - ChiQ CQHDU30T1T1W Manual De Instrucciones

SELECT A VENTING MODE:
The air must not be discharged
into a flue that is used for
exhausting fumes from
appliances burning gas or other
fuels.
Regulations concerning the
discharge of air have to be
fulfilled.

VERTICAL DISCHARGE

Vertical is the most used.
If you select this venting direction. You only need
to open the ducting knockout A. Remove the
ducting knockout by inserting a Flat head
screwdriver under one end and prying it up. Then
snip or break the attachment points by tin snips.
You must make sure that the ducting knockout B is
not removed.

HORIZONTAL DISCHARGE

Assuming that the range hood is located against
an outside wall. Horizontal discharge is preferred
provided that there are no obstructions such as ,
wall joists, or where openings are difficult to make.
If you select this venting direction, you only need
to open the ducting knockout B.
3