Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
In a ductless installation the air is re-circulated Ensure the power has been turned
off before beginning this installation. Plug must be assembled in places easy to
drag and insert.
To install this hood you will require two assistants. You will need following tools and
material to complete this installation.
You will need following tools and material to
complete this installation.
Tools you will need:
• Drill appropriate to your wall
• Phillips Screwdriver
• Tape Measure
• Hand Saw or Jig Saw
Installation work and electrical wiring must be
done by qualified person(s) in accordance with
all applicable codes and standards, including fire
rated construction.
Do not discharge the exhaust air into a flue from
other appliances burning gas or other fuels.
Regulations concerning the discharge of air
have to be fulfilled.
The cooker hood must be placed at a minimum
distance of 65cm above the cooking surface of a
hob and a maximum distance of 75cm.
1. According to the figure 9 make sure
the position of hood in the cabinet. The
wood strips should be line up with the 4
keyholes slots on the top of the range
hood.
On the cabinet install 4 screws
(supplied) according to the relative
position of 4 key holes on the bottom of
the hood. The extent of screwing should
be convenience to the next installation.
2. Hand the hood and let it's 4 key holes
aim at screws, the 4 screws should be in
the narrow parts of key holes. Screws
should be fasten
firmly. Make sure that the installation
between the hood and cabinet is enough
fasten.
5
Publicidad
Tabla de contenido
