Ventilations - Shark SPARTAN CARBON Manual Del Usuario

VENTILATION INSIDE THE HELMET.
The upper air intake (Fig. A) allows air to enter onto
the upper part of the head and thus renew the air in
the head section. The channels incorporated in the
internal shock absorbers facilitate the circulation of
air over the surface of the head.
The quality and design of the textile comfort parts
contribute to the proper distribution of air. The po-
sition of the upper ventilation system is designed to
optimise the effectiveness of its intake of air. Depen-
ding on the type of your motorbike, the fairing may
reduce the effectiveness of this ventilation.
The ventilation is in the open position when the
tongue is pushed backwards
the tongue is pushed forwards
LOWER VENTILATION.
The principal function of this air intake is to direct
a flow of fresh air over the interior surface of the
visor in order to limit the risk of misting. The fresh
air diffused cuts off contact with the hot air emitted
by breathing or even by the head inside the helmet.
To open (1) or close (2)
the button as indicated.
Warning! Do not open or close any vents
while operating your motorcycle. You could
lose control of your motorcycle, resulting in an acci-
dent, personal injury or death.
AERODYNAMICS AND ACOUSTICS
The SPARTAN has been carefully designed to offer
you the greatest pleasure in use.
The profile of the helmet, its impermeability and the
quality of the materials used enable air noise on the
crown of the head and aerodynamic turbulence to
be filtered as far as possible. In order for the use
of your helmet to be as pleasant as possible, it is
important for turbulence or air eddies created by the
fairings not to impair the aerodynamic qualities of
your SPARTAN helmet. The shape of the fairings of
your motorcycle and/or your size should not cause
air eddies to reach the lower part of your helmet.
(1) and closed when
(2) .
the lower ventilation, press
2
A
1
2

VENTILATIONS

1
15